Best E-Bike Gloves 2026: Waterproof & Padded for Winter

This article may contain affiliate links. If you make a purchase through these links, we may earn a small commission at no extra cost to you. Learn more.

For a wet winter commute, choose a glove that lets you brake and change assist settings confidently before worrying about extras. The Sealskinz Bodham is the strongest all-round pick here: it is made for cycling, with a waterproof membrane, grippy palm and reflective detail. If palm cushioning matters more and you mostly ride in dry weather, the padded FDX is a different choice—not a waterproof substitute.

No single pair suits every hand or every temperature. Check the size chart for the exact version and allow room to bend your fingers around a brake lever. A glove that squeezes your fingers or bunches at the grip is a poor winter choice, however warm its lining sounds.

Our top four picks

Black Sealskinz Bodham waterproof cycling glove in large

Sealskinz Bodham, black L

Best overall for wet commutes

Cycling-specific waterproof construction, grippy palm and reflective details.

Sealskinz Harling waterproof all-weather glove

Sealskinz Harling

Best for controls and general use

Waterproof all-weather glove with a grippy palm and touchscreen fingertips.

Yellow FDX full-finger padded winter cycling gloves in large

FDX Winter Cycling Gloves, yellow L

Best padded choice for drier rides

Gel-padded palm and wind resistance, but water-resistant rather than waterproof.

GripGrab waterproof knitted thermal cycling gloves

GripGrab Waterproof Knitted Thermal

Best knitted wet-weather choice

A knitted feel with a waterproof membrane for cool, wet rides.

In this guide

Comparison at a glance

Waterproof and water-resistant are not interchangeable. A membrane glove is the more sensible starting point for regular rain; the padded FDX is for riders who can accept less wet-weather protection. None of these specifications proves how warm a particular person will feel.

GloveWet-weather claimPalm/feelBest for
Sealskinz BodhamWaterproof membraneGrippy cycling palmWet commutes
Sealskinz HarlingWaterproof membraneGrippy, pre-curved fingersMixed-use rides
FDX Winter, yellow LWater-resistantGel-padded palmDrier, rougher routes
GripGrab Knitted ThermalWaterproof membraneKnitted fitCool, wet rides

The four gloves in detail

Sealskinz Bodham — best overall for wet commutes

Black Sealskinz Bodham waterproof cycling glove in large

The Bodham is a cycle-specific waterproof glove, rather than a general outdoor glove pressed into service on the bars. Sealskinz specifies a waterproof membrane, a grippy palm and reflective details. That combination makes it the clearest choice here for a regular wet commute.

It is not a heavily padded glove. The black large version shown here must fit your hand: measure across the knuckles and use the maker’s chart instead of buying large by habit. Reflective details can help visibility but do not replace the bicycle lights required after dark.

Verdict: Choose it when rain protection and secure grip matter most. If cushioning is your priority and rain is occasional, compare the FDX instead.

Sealskinz Harling — best for controls and mixed use

Sealskinz Harling waterproof all-weather glove

The Harling is a waterproof all-weather glove with a grippy palm, pre-curved fingers and touchscreen-capable fingertips. It is less cycling-specific than the Bodham, but the finger shape and palm make it worth comparing if you use a touchscreen display or phone as well as the brake levers.

Its lightweight all-weather design should not be mistaken for an extreme-cold gauntlet. Check the cuff overlap with your jacket and the fit around each brake lever. Touchscreen compatibility can vary with the screen and fit; do not buy it solely to avoid one button press.

Verdict: Choose it for waterproofing and a more general-use glove. Choose the Bodham for the more cycling-focused palm and reflective detailing.

FDX Winter Cycling Gloves — best padded option for drier rides

Yellow FDX full-finger padded winter cycling gloves in large

The yellow FDX in size L has gel padding at the palm, a wind-resistant design and touchscreen fingertips. It addresses pressure and vibration more directly than the two Sealskinz options. For a rider whose route is mostly dry but rough, that can be the deciding feature.

The distinction matters: its product description says water-resistant, not waterproof. Do not make it your sole pair for sustained rain. The conspicuous colour is useful, but fit, braking feel and proper lights still matter more than colour alone.

Verdict: Choose it for palm cushioning on mainly dry rides. Choose a membrane glove if rain is part of your normal commute.

GripGrab Waterproof Knitted Thermal — best knitted choice

GripGrab waterproof knitted thermal cycling gloves

GripGrab combines a knitted outer feel with a waterproof membrane in this thermal cycling glove. It offers a different hand feel from the more structured Bodham and Harling, which may suit riders who dislike stiff winter gloves. The maker positions it for cool, wet rides.

A knitted construction is not a promise of warmth below freezing. GripGrab itself cautions that this model is unlikely to be warm enough around sub-zero temperatures. If you regularly ride in deeper cold, compare a more insulated glove or a suitable liner without compromising lever control.

Verdict: Choose it for cool, wet conditions and a knitted feel. Choose the Bodham if a more structured cycling palm is your first priority.

How to choose winter e-bike gloves

Start with rain, then warmth

For regular wet rides, look for a waterproof membrane and a cuff that works with your jacket sleeve. Water-resistant fabric may cope with a brief shower but is not the same promise. Cycling UK’s winter clothing advice also suggests adding a liner for riders whose fingers run cold. Leave enough room for the liner; a tight pair can make both comfort and control worse.

Check braking and grip before padding

Make a fist and reach for both brake levers while trying the gloves on. You should be able to brake firmly and use the assist controls without pulling a finger out of the glove. Palm padding may help with pressure on rough routes, but extra bulk can dull feel. An e-bike does not automatically require a different glove from an ordinary bicycle; your speed, route, weather and controls set the need.

Visibility is useful, but lights are essential

Reflective trim can add visibility, especially on a dark commute. It is not a substitute for a working front and rear light. Highway Code rules 59 and 60 cover clothing and the lighting requirements for cycling at night. Our e-bike light guide covers the equipment side of that decision.

Fit and care

Measure the hand, then test the controls

Measure around the widest part of your palm, excluding the thumb, and compare it with the brand’s own size chart. Finger length and cuff shape matter too. The Bodham and FDX versions shown here are size L; use the same product page to check other sizes, but do not assume their specifications or ratings transfer unchanged. If your fingers go numb from the fit or the glove catches the shifter, choose a different size or model.

Wash and dry by the maker’s instructions

Waterproof membranes and palm finishes need care. Follow the label rather than guessing at a hot wash or tumble dryer, and let gloves dry fully before storing them. For the Bodham, Sealskinz advises a 30°C wash and drip drying. A damp liner left inside a bag is an avoidable way to start the next ride cold.

Winter hand comfort is part of the wider setup: check tyre choice for wet routes, helmet fit and UK e-bike rules rather than expecting gloves alone to solve a difficult commute. For longer outings, our e-bike touring guide covers the wider kit.

How we chose

We compared wet-weather construction, palm feel, fit considerations and the conditions each maker actually describes. The shortlist deliberately includes a padded water-resistant option as well as waterproof choices, because those solve different problems. We have not personally worn these four variants through winter; warmth, dexterity and durability are not hands-on test results here.

The bottom line

For a wet UK commute, start with the Sealskinz Bodham. Choose the Harling if a multi-use waterproof glove and touchscreen fingertips suit you better. The FDX is the padded pick for mainly dry rides, while the GripGrab offers a knitted feel for cool, wet weather. If your rides are regularly sub-zero, do not assume any of these is enough without testing your own comfort and lever control.

Frequently asked questions

Do e-bike riders need special winter gloves?

Not necessarily. The important checks are your weather, brake and assist controls, grip, fit and how cold your hands get. A well-fitting cycling glove can serve both an e-bike and an unassisted bicycle.

Are water-resistant cycling gloves waterproof?

No. Water-resistant fabric may handle light moisture, but it is not the same claim as a waterproof membrane. Choose a waterproof design for a regular wet commute.

Should winter cycling gloves have gel padding?

Padding can help with palm pressure on rough rides, but it adds bulk. Try to judge lever feel and fit first; not every rider needs a gel palm.

Are touchscreen fingertips useful on an e-bike?

They can make it easier to use a compatible display or phone without removing a glove. Responsiveness varies by screen and fit, so it should not outweigh braking control.

How tight should winter cycling gloves be?

They should stay secure without squeezing your fingers, and you should be able to grip the bar and brake firmly. Check the maker’s hand measurement chart for each model.

Do reflective gloves replace bike lights?

No. Reflective details may help visibility, but the Highway Code sets separate lighting requirements for cycling at night. Keep your front and rear lights working.

Privacy · Cookies · Terms · Affiliate Disclosure

© 2026 E-Bike Geek. All rights reserved. Operated by NicheForge Ltd.

We use cookies to improve your experience and for analytics. See our Cookie Policy.
Scroll to Top