Best E-Bike Racks for Cars UK: Towbar Picks & Boot-Rack Limits

This article may contain affiliate links. If you make a purchase through these links, we may earn a small commission at no extra cost to you. Learn more.

The best e-bike rack for a UK car must fit three things at once: the bike, the rack and the vehicle’s towbar. Start with your bike’s actual transport weight and the car or towbar’s permitted noseweight. A rack’s advertised payload is not permission to exceed either limit. For typical full-size e-bikes, an e-bike-rated towbar platform is a more defensible starting point than an ordinary boot-hanging rack.

Our first choice for two heavier bikes is the Thule EasyFold XT 2, provided your vehicle has enough noseweight capacity for the 17.9kg rack plus the bikes. The Westfalia BC 60 offers another folding 60kg platform; the lighter Thule VeloCompact makes sense only when both bikes stay within its tighter limits. The Atera Strada E-Bike M is worth considering if its exact mounting layout suits your bikes. None is universal: check your towball, electrics, wheelbase and tyre fit before buying.

Our top picks

Thule EasyFold XT 2 (933100) towbar e-bike carrier product photograph

Thule EasyFold XT 2 (933100)

Best for heavier pairs

60kg total; 30kg per bike; folds for storage. The loading ramp is a separate accessory.

Westfalia BC 60 towbar e-bike carrier product photograph

Westfalia BC 60

Best folding alternative

60kg total; 30kg per bike; folds compactly. Confirm tyre and frame fit for the exact rack.

Thule VeloCompact 13-pin 2-bike towbar e-bike carrier product photograph

Thule VeloCompact 13-pin 2-bike

Best for lighter e-bikes

46kg total; 25kg per bike; 14.2kg rack. Two 25kg bikes exceed its 46kg combined limit.

Atera Strada E-Bike M 022686 towbar e-bike carrier product photograph

Atera Strada E-Bike M 022686

E-bike-specific alternative

Two-rail towbar carrier for e-bikes. Check the exact 022686 manual and car fit before ordering.

In this guide

E-bike racks compared

RackBike and rack limitsBest forCheck before buying
Thule EasyFold XT 260kg bikes combined; 30kg each; 17.9kg rackTwo heavier e-bikes and compact storageNoseweight, frame/tyre fit, 13-pin socket
Westfalia BC 6060kg combined; 30kg each; 18.4kg rackFolding 60kg platform alternativeBike wheelbase and tyre width
Thule VeloCompact 246kg combined; 25kg each; 14.2kg rackTwo lighter e-bikesBoth per-bike and combined limits
Atera Strada E-Bike M60kg combined; 30kg per rail; check exact rack massAn e-bike-rated Atera platformTowball, tailgate and tyre fit

The limits above come from the rack makers for the named models. A lower limit on your vehicle, towbar or bike configuration still wins. Thule’s EasyFold specifications, VeloCompact specifications and Westfalia’s BC 60 data are useful model checks.

The four racks in detail

Thule EasyFold XT 2 (933100): The heavier-pair starting point

Thule EasyFold XT 2 (933100) towbar e-bike carrier product photograph

Thule’s model 933100 is a two-bike, 13-pin towbar platform rated for 60kg combined and 30kg per bike. It folds for handling and storage and has a tilt function. Its own 17.9kg mass matters: two 30kg bikes bring the load at the towball to roughly 77.9kg before any accessories, so a 75kg noseweight limit would not be enough.

Before you order: The EasyFold XT loading ramp is a separate accessory, not a feature included with every rack order. Confirm the exact package and your bike’s frame, tyre and wheelbase dimensions.

Westfalia BC 60: A compact-folding 60kg alternative

Westfalia BC 60 towbar e-bike carrier product photograph

The BC 60 is a two-bike, towball-mounted carrier rated by Westfalia at 60kg in total and 30kg per bike. It folds down for storage, and Westfalia lists a 1300mm maximum wheelbase for the referenced model. At 18.4kg before bikes, it needs slightly more noseweight headroom than the Thule EasyFold.

Before you order: Check the exact BC 60 generation, wheelbase, tyre width, frame clamp and your towbar specification. Do not assume a ramp or third-bike extension is in the box because those are separate accessories in Westfalia’s range.

Thule VeloCompact 13-pin 2-bike: A lighter rack with a tighter bike limit

Thule VeloCompact 13-pin 2-bike towbar e-bike carrier product photograph

The two-bike 13-pin VeloCompact is 14.2kg and has a 46kg combined bike payload. Thule states a 25kg maximum for each bike. That can suit a pair of relatively light e-bikes, but two bikes at 25kg each would total 50kg and therefore exceed the rack’s combined limit. Use both limits, not whichever number is more convenient.

Before you order: One Amazon title for this variant mentions 30kg e-bikes, but its own specification and Thule’s model data say 25kg per bike. Check the model number, 13-pin socket, 1250mm wheelbase and 3-inch tyre limit.

Atera Strada E-Bike M 022686: A two-rail e-bike carrier to compare

Atera Strada E-Bike M 022686 towbar e-bike carrier product photograph

The Strada E-Bike M listing names Atera model 022686. Its model manual shows a 60kg two-bike payload and 30kg maximum per rail. The rack uses a towbar platform rather than straps over the boot, and Atera’s sliding access mechanism may help on some cars.

Before you order: The Atera maker page currently displays technical data for a different Black Edition variant. Use the exact 022686 manual and confirm tailgate clearance on your car; a tilting or sliding rack does not guarantee that every rear door opens.

Do the weight calculation first

A 60kg rack is not always a 60kg vehicle load

Find the lower permitted noseweight in your car and towbar documentation. Subtract the rack’s own weight from that number, then compare the remainder with the rack’s bike payload. Finally, weigh each bike as it will travel and check its individual rail limit. The tightest limit controls the setup. For example, a 75kg towball limit minus an 18kg carrier leaves 57kg for bikes even if the carrier itself claims 60kg.

Remove a battery for transport only in line with the bike maker’s instructions. Secure it inside the car, then weigh the bike in the configuration you will carry. Battery removal cannot make an unsuitable frame clamp, overloaded rail or inadequate towbar safe. Our battery transport guide discusses protecting a removed battery; our folding e-bike guide explains why quoted bike weights can vary by configuration.

Towbar fit, electrics and loading

Fit the vehicle and the bikes

Check that your towbar permits the loaded carrier, has the correct towball clearance and provides the electrical connection required by the exact rack. These four selected versions use towbar platforms; the two Thule picks specify 13-pin electrics. Measure wheelbase, tyres and frame clamp points, including any unusual step-through frame or carbon frame. Ask the rack maker about an appropriate adapter rather than clamping a vulnerable tube by guesswork. A dealer fit check is worthwhile for an expensive rack. Check the seller’s current return terms for a bulky carrier, especially the cost of return shipping and whether trial fitting changes eligibility.

Loading and rear access

Use a ramp only if it is specified for the rack and your bike; do not assume one comes with the carrier. Follow the rack’s loading order and straps, keeping within the individual rail and combined limits. Check rear-door clearance on your exact car with the rack tilted or slid back before relying on it for boot access. A carrier that tilts on one hatchback can still meet the tailgate of a van or SUV.

Can a boot rack carry an e-bike?

A standard hanging boot rack is not an automatic solution for a lighter e-bike. The manufacturer of the familiar Saris Bones EX explicitly says it cannot transport e-bikes; taking off a battery does not override that restriction. Boot racks also need a vehicle-specific fit, an appropriate bike frame and clearance for lights, plate and bodywork.

There is no boot-mounted pick in this guide. If you cannot fit a towbar, do not buy an ordinary boot rack on the strength of its generic kilogram rating. Look for a carrier explicitly approved by its maker for your e-bike and car, or consider a suitable folding bike that can travel inside the vehicle.

Security and travel checks

Lights, plate and insurance

Make sure the loaded bikes and rack do not obscure the rear number plate or road lights. Use the rack’s correctly connected lighting and a legal duplicate plate where required; GOV.UK sets out number-plate display rules. Check the car’s handbook and insurer’s terms for loads and accessories, and keep the rack’s fitting instructions with the vehicle.

Prevent movement and theft

Recheck the towball fastening, bike clamps, wheel straps and lighting before setting off and at stops. A built-in lock is a delay, not a guarantee; remove easily detached bike accessories and use an additional lock if appropriate when parked; our e-bike locking guide covers the bike itself. Inspect straps and clamps for wear after trips. The e-bike maintenance guide covers routine bike checks before a journey.

How we chose

We compared the exact linked carriers against the decisions that matter when transporting an e-bike: manufacturer-rated per-bike and total payload, carrier weight, folding and access mechanisms, towbar electrics and fit. We did not road-test these racks or measure their sway. Manufacturer manuals should settle a specification conflict; if a marketplace title makes a broader claim, use the narrower verified model limit. Ordinary boot racks are not substitutes for an e-bike-approved carrier, even when their headline weight figures look sufficient.

The bottom line

Start with the EasyFold XT 2 if two heavier bikes fit your vehicle’s noseweight and you value compact storage. Compare the BC 60 if its folding layout and bike dimensions suit you. Use the VeloCompact only for bikes within 25kg each and 46kg combined; consider the Atera Strada E-Bike M if its mounting layout and car clearance suit you. If you have no compatible towbar, pause the purchase until a rack maker confirms a safe, e-bike-approved alternative for your bike and vehicle.

Frequently Asked Questions

Can a boot-mounted bike rack carry an e-bike?

Only if its maker explicitly rates the exact rack for your e-bike and car, and all weight and fit limits are met. Ordinary boot racks should not be assumed suitable after simply removing the battery; Saris says its Bones EX cannot carry e-bikes.

How do I calculate towbar noseweight for an e-bike rack?

Find the lower car or towbar noseweight limit. Subtract the rack’s own weight, then compare the remaining allowance with the bikes’ combined weight and the rack’s payload limit. Each bike must also fit its individual rail limit.

Should I remove the e-bike battery before carrying it?

Follow the bike maker’s transport instructions. If removal is advised, secure the battery inside the car and weigh the bike as it will travel. Removal does not override an unsuitable rack or insufficient towball capacity.

Does the Thule EasyFold XT 2 include a loading ramp?

The EasyFold XT ramp is sold as a separate accessory unless a specific bundle clearly includes it. Check the exact package before ordering.

Can I open the boot with bikes on a towbar rack?

Some racks tilt or slide for rear access, but clearance varies by vehicle and load. Confirm the mechanism and test or verify fit for your exact car before relying on boot access.

Which e-bike rack is best for two 25kg bikes?

A rack needs at least 25kg per-bike capacity and 50kg combined bike payload, plus enough car and towbar noseweight allowance for the rack itself. The 46kg-total VeloCompact 2 cannot carry two 25kg bikes, despite its 25kg individual limit.

Privacy · Cookies · Terms · Affiliate Disclosure

© 2026 E-Bike Geek. All rights reserved. Operated by NicheForge Ltd.

We use cookies to improve your experience and for analytics. See our Cookie Policy.
Scroll to Top